TID POWER SYSTEM CO ., LTD
Scientific management Technological innovation Superior quality Customer satisfaction
Add to Cart
High Quanlity UV Resistance Epoxy Resin Fiberglass Pole For Composite Insulator Fuse Cut Out Surge Arrester
Product:
1.Product Description of high quanlity uv resistance epoxy resin fiberglass pole for composite insulator fuse cut out surge arrester
UV resistant Fiberglass rod is a material with the ability to resist UV radiation. It is usually made of fiberglass reinforced resin and achieves UV resistance by adding special UV absorbers or UV stabilizers to the resin
2. Technical Parameters of high quanlity uv resistance epoxy resin fiberglass pole for composite insulator fuse cut out surge arrester
| No. | Technical specification | Unit | value |
| 1 | Density(20℃±2℃) | g/cm3 | ≥2.2 |
| 2 | Water absorption rate (20℃±2℃,24h) | % | ≤0.05 |
| 3 | Tensile strength | Mpa | ≥1200 |
| 4 | Bending strength | Mpa | ≥960 |
| 5 | Dye penetrated test | Min | ≥15 |
| 6 | Water diffusion test (1%NaCl, 100h 12kv/1min) | mA | ≤0.1 |
| 7 | Shearing strength along laminas | Mpa | ≥50 |
| 8 | Volume resistivity (140℃,96h) | Ω.M | ≥1010 |
| 9 | DC withstand voltage (10mm) | Kv | ≥50 |
| 10 | Lighting impulsed withstand voltage (100kv,10mm) | Times | ≥5 |
| 11 | Bending strength at heating conditions | Mpa/150℃ | ≥350 |
| 12 | Torsion strength | Mpa | ≥800 |
| 13 | Stress corrosion (1mol/1HNO3,at 67%stress) | h | 96 |
3. Application of high quanlity uv resistance epoxy resin fiberglass pole for composite insulator fuse cut out surge arrester
nsulation material: UV resistant glass fiber can be used as insulation material for power equipment and wires and cables. They have excellent electrical insulation performance and weather resistance, which can effectively isolate current and prevent damage to power equipment from ultraviolet radiation.
Reinforced structure: In power transmission lines and power towers, UV resistant glass fibers can be used to enhance the strength and stability of the structure. They have high strength and durability, providing additional support and protection to ensure that transmission lines and power towers can withstand harsh environmental conditions and ultraviolet radiation.
Insulation material: In power equipment and power stations, UV resistant glass fiber can be used as insulation material to reduce energy loss and heat conduction. They have good insulation performance and can help improve the efficiency and performance of power equipment.
Packing and Shipping:
Insulator Fittings/ Fiberglass Rod/ Rubber Packaging and Shipping:
Insulator Fittings: Packaged in cardboard boxes, wrapped in plastic wrap and secured with tape.
Fiberglass Rod: Wrapped in plastic bubble wrap and placed in cardboard boxes.
Rubber: Placed in cardboard boxes lined with plastic wrap.